Gas Boiler servicing, Routine Inspections and Landlord Certification.
All of your gas appliances, including your gas boiler, gas cooker and gas fire should be safety checked once a year and serviced regularly according to manufacturer’s instructions.
Your appliances should only be serviced and safety checked by a Gas Safe registered engineer you could be putting you and your family at risk and in possible danger of carbon monoxide poisoning if not checked.
What is a gas safety check?
A gas safety check involves a Gas Safe registered engineer inspecting your gas appliances. They will check the appliance is working correctly and will check the following four areas:
- Gas appliances are on the right setting and burning correctly with the correct operating pressure
- Harmful gases are being removed from the appliance safely to the air outside
- That any ventilation routes are clear and working properly
- All the safety devices are working
The check will identify any defects which require remedial work. You should have a gas safety check every year. If you are a landlord as this is the law
What is a service?
Whilst a gas safety check assesses the basic safety of a gas appliance a service will consist of a full check of a gas appliance and the engineer is likely to take the appliance apart to inspect it. The engineer will assess the physical condition of the appliance, installation pipework, air vents and any flues for deterioration. They will carry out performance tests and take any necessary remedial action.
Appliances should be serviced regularly in accordance with manufacturer’s instructions. Servicing your gas appliances regularly will make sure they are safe to use. It will also maintain your appliances efficiency and performance.
Signs that your appliances need servicing?
Gas appliances should be serviced regularly but if you notice any of the warning signs below you should arrange for a Gas Safe registered engineer to service your appliance as soon as possible:
- Your gas appliance is not working properly
- Your appliance is burning with a lazy yellow flame instead of a crisp blue flame
- You can see black marks or stains on or around your gas appliances
- The pilot light keeps going out
- There is increased condensation in the room
What if my engineer identifies a problem with my gas appliance?
All Gas Safe registered engineers must follow the Gas Industry Unsafe Situations Procedure (GIUSP) when assessing the risks of an unsafe gas appliance. The guidance provides ‘best practice’ advice to Gas Safe registered engineers on how they should deal with various gas safety concerns which may affect your safety. Download the Gas Industry Unsafe Situations Procedure for more information regarding this procedure.
Gas safety records
After a Gas Safe registered engineer has fitted, carried out a safety check or serviced your gas appliance; they may leave you with a report which explains what checks they have completed. This report may be issued as a gas safety record, depending on the job you have asked them to do. It isn’t always a legal requirement for your engineer to give you this type of information, but many Gas Safe registered engineers will provide it or similar. We recommend you agree with your service provider before they complete the work what documentation you will receive.
The gas safety record tells you that the gas appliance or gas fitting has been checked to see if it is working safely and meets the correct safety standards. This information may also tell you when you next need to service the appliance. As with any documentation always check it includes your engineer’s name and Gas Safe registration number.
Flues, chimneys and air vents
Flues, chimneys and air vents play a vital role in the safe operating of gas appliances. Flues and chimneys allow products of combustion to escape from your home. Air vents ensure there is a good supply of combustion air (ventilation) to appliances. For this reason you must keep all flues, chimneys and air vents clear.
Never block these airways to prevent a draft. Blocking ventilation is dangerous and could result in carbon monoxide building up in your home.
Have chimneys checked every year, no matter how much you use the fire, to make sure there are no blockages and fumes can escape freely. The Gas Safe registered engineer will check for bird’s nests, leaves and other natural debris, they could be blocking the exit.
Do you live in a block of flats or terraced housing? It is also possible for carbon monoxide to seep into properties through shared flues and chimneys. If you live in a property with a shared flue or chimney, share responsibility to get them checked every year to make sure they are allowing gas to escape
Call out and break down
Call out charge is £65.00, then every 15 minutes on site £15.00 plus parts mileage and VAT
Mileage charge after 50 miles round trip. 30 pence per mile plus vat.
Safety check £45.00 plus VAT
Full service and clean £95.00 plus parts and VAT
Landlord certificate £45.00 plus VAT
Boiler types available: